Sanyo PLC-XL40 - Manual (Page 31)

31
Computer Input
Press the MENU button to display the On-Screen
Menu. Use the Point
7 8 buttons to move the red
frame pointer to the Image Select Menu icon.
1
2 Use the Point ed buttons to move the red frame
pointer to the desired level and then press the SELECT
button.
Move the red frame pointer to
the desired level and press
the SELECT button.
The image level being selected.
Image Select Menu
Normal picture level preset on this projector.
Standard
Picture level with improved halftone for graphics.
Real
For viewing the image projected on a blackboard. See
above for further description.
Blackboard(Green)
Image Select Menu icon
Select an image level from among Dynamic, Standard, Real,
Blackboard (Green), Image 1, Image 2, Image 3, and Image
4 with the IMAGE button on the remote control.
IMAGE button
Dynamic
Real
Image 1
Image 2
Image 3
Normal picture level preset on the projector.
Picture level with improved halftone for graphics.
Standard
Real
Image 1–4
Image Level Selection
Direct Operation
Menu Operation
Image 4
User preset image in the Image Adjust Menu (p.33).
Image 1–4
Blackboard (Green)
For viewing the image projected on a blackboard. This
mode assists to enhance the image projected on a
blackboard. This is mainly effective on a green colored
board, not truly effective on a black colored board.
Blackboard(Green)
For viewing pictures in a bright room.
Dynamic
For viewing pictures in a bright room.
Dynamic
User preset image in the Image Adjust Menu (p.33).
Standard
Remote Control
IMAGE
button