Sanyo PLC-XL40 - Manual (Page 34)

34
Computer Input
When Digital zoom + is selected, the On-Screen Menu
disappears and “D. zoom +” is displayed. Press the
SELECT button to expand the image size. Use the Point
ed7 8 buttons to pan the image. The Panning function can
work only when the image is larger than the screen size.
A projected image can be also expanded by pressing the
D.ZOOM
e button on the remote control.
Digital zoom +
When Digital zoom – is selected, the On-Screen Menu
disappears and “D. zoom –” is displayed. Press the SELECT
button to compress image size.
The projected image can be also compressed by pressing
the D.ZOOM
d button on the remote control.
To exit the Digital zoom +/– mode, press any button except
the D.ZOOM
ed , SELECT, and Point buttons.
To return to the previous screen size, select a screen size in
the Screen Size Adjustment or select an input source from
the Input Source Selection (p.26) again, or adjust the screen
size with the D.ZOOM
ed buttons.
Digital zoom –
Remote Control
D.ZOOM + button
POINT buttons
SELECT button
D.ZOOM - button
For zooming in and out the images
✔
Notes:
•The panning function may not operate properly
if the stored Mode in the PC Adjust Menu is
used (p.30).
•The minimum compression ratio is limited
depending on the input signal or when the
Keystone function is working.
•True, Full screen, and Digital zoom +/– cannot
be selected when 480i, 575i, 480p, or 575p is
selected in the PC System Menu (p.27).
•Digital zoom +/– cannot be selected when Full
screen or True is selected.
Adjust the screen scale and position manually with this
function.
Press the SELECT button at Custom and the “Custom” is
displayed on the screen for a few seconds and then the
Aspect dialog box appears.
Scale H/V............ Adjust the Horizontal/Vertical screen
scale.
H&V.................... When set to “On,” the aspect ratio is
fixed. “Scale V” appears dimmed and
becomes unavailable. Adjust “Scale H,”
then the screen scale is automatically
modified based on the aspect ratio.
Position H/V ....... Adjust the Horizontal/Vertical screen
position.
Common ............ Save the adjusted scale. Press the
SELECT button at Common to display a
confirmation box. To save the scale,
press the SELECT button at “Yes.”
When Custom is selected, the saved
scale is used.
Reset.................. Reset the Common data. Press the
SELECT button at Reset to display a
confirmation box. To reset, press the
SELECT button at “Yes.”
Custom
✔
Notes:
•When no signal is detected, “Normal” is set
automatically and the Aspect dialog box
disappears.
•The adjustable range for Scale H/V and Position
H/V is limited depending on the input signal.
Press the SELECT button at
Common or Reset, to display
a confirmation box.