Sharp O2 - Manual (Page 22)

21 Call Functions
3. Enter the phone number you wish to make another
call.
Tip
• You can also make another call by entering the phone
number during a call instead of steps 1 and 2. The
current call is automatically put on hold.
Call Waiting
This service notifies you of another incoming call
whilst you have a call in progress.
1. During a call, press
[Answer] to answer the
second call.
The first call is put on hold and you can now talk to
the second caller.
2. Press [Options] and select “Swap” to switch
between the two calls.
3. Press [Options] and select “End Call”,
then press to end the current call and return to
the held call.
Note
• You need to set “Call Waiting” to “On” if you use
Call Waiting service (p. 80).
• Call Waiting service may not be available on all
networks. Contact your network operator for more
information.
• If you do not wish to answer the second call, press
[Reject] in step 1. The call details of the second
call will be saved as a missed call.
Conference Call
Conference call is a call with more than 2 participants.
You may include up to 5 participants in a conference
call.
Making a Conference Call
To make a conference call, you must have one active
call and one held call.
1. Press
[Options] to display the Options Menu.
2. Press or to select “Multiparty”, then press
.
3. Press or to select “Join All”, then press
to join the conference call.
4. Press to end the conference call.
Note
• Conference call service may not be available on all
networks. Contact your network operator for more
information.
Adding New Participants to the Conference Call
1. Press
[Options] to display the Options Menu.
2. Press or to select “Dial”, then press .