Sharp O2 User Manual

Page 49

Advertising

Fun & Games

Note
• You cannot make a dotted semiquaver (semiquaver

rest) or a dotted semibreve (semibreve rest).

• Three continuous notes are required for triplet.

To specify a tie, press

after selecting the target

notes.
An underscore (_) is displayed next to the note, and the
note is tied with the next one.
To enter the next note, press

and move the cursor to

the right. Then, repeat the operation on the previous
page.
If the cursor is positioned next to a note, you can repeat
the note immediately left of the cursor when

is pressed.

Set the Tone
The phone can play notes using different instruments.
1. Perform steps 1 to 13 in “Creating Your Original

Ringing Tone” on page 45.

2. Press

to select “Tone Set”, then press

3. Select a category of the tone by pressing

4. Select a tone by pressing

, then press

When “Play Current Chord” is selected, the melody
entered is played back in the selected tone.
When “Confirm Tones” is selected, the syllable
names are played back in the selected tone.

5. Select “OK”, then press

Now you can create a melody.

You can select from the following 128 tones