Sharp O2 - Manual (Page 52)

51 Fun & Games
3. Press or to select an original ringing tone
you wish to edit, then press [Options].
The Options Menu is displayed.
4. Press or to select “Data Edit”, then press
.
5. Edit the title and press .
6. Press or to select a tempo, then press .
7. Press or to select the number of chords, then
press .
8. Select a note you wish to change by pressing or
, then edit notes.
For details on editing tones, see “Tone Editor” on
page 52.
When you add notes, enter the note correctly on the
cursor.
To delete a note, press
[Clear] briefly.
Press and hold [Clear] to clear all tones.
9. When you finish editing, press [Options] to
display the Options Menu.
10.Select “Save”, then press .
11.Select “Save to Gallery”, then press .
12.Press or to select “Over Write”, then press
.
The original ringing tone is changed.
If you select “New”, the melody before the
correction is not modified. The original ringing tone
is registered as a new original ringing tone.
Note
• When the number of chords is modified in step 7, the
confirmation screen may be displayed. When you
select “Yes”, a section of the melody may be deleted.
• When you are going to add notes in step 8, you cannot
add any notes if you have already entered 380 notes
(for 8 chords melodies) or 190 notes (for 16 chords
melodies).
Tip
• To delete the continuous melody, press
[Options] and then press after selecting “DEL
after Cursor” or “DEL before Cursor.” You can
delete the melody after the cursor or before the
Cursor.