Tone editor – Sharp O2 User Manual

Page 53

Advertising
background image

Fun & Games

52

Copying and Pasting Notes
You can copy and move a part of a melody to another
position.
Only original ringing tones or editable melodies can be
copied or moved.
1. Perform steps 1 to 7 in “Editing Original Ringing

Tones” on page 50.

2. Press

[Options] to display the Options Menu.

3. Press

or

to select “Copy” or “Cut”, then

press .

4. Move the cursor to the first note to be copied or to

be cut and press

.

5. Move the cursor to the last note to highlight the area

and press

.

The highlighted area will be saved temporarily in
the memory.

6. Press

[Options] to display the Options Menu.

7. Press

or

to select “Paste”, then press

.

8. Move the cursor to the point you wish to paste the

notes, then press

.

Saved notes are pasted.

Tone Editor (M 3-3)

You can make a tone and use it for the original ringing
tone.
Up to five types of tones can be registered respectively
for 8 chords and 16 chords.
FM Sound Source
Various types of tones can be composed by combining
the functions that generate one sine wave called an
“Operator”. The combination of the operator is called
an algorithm.
The operator acts as the modulator (modulating part) or
the carrier (modulated part) depending on the
algorithm.

• In each operator, various parameters such as multiple

or envelope can be set.

• By setting the feedback to the specified operator,

wider tone ranges can be created.

Advertising