Kathrein UFS 902 - Manual (Page 13)

13
The following display appears:
Use the
 
buttons here to select the settings for your TV set.
When doing this, refer to the operating instructions for your TV set!
Video Output via
Select here the connection on the receiver to which you have connected your television.
Either
SCART or
HDMI/YUV
FIRST INSTALLATION
TV aspect ratio
Here you select the TV's picture format. Either
- 4:3 or
- 16:9
Picture format
Select here the type of screen display,
depending on the setting of your TV format:
- TV format “4:3”: Pan & Scan or Letterbox
- TV format “16:9”: Always 16:9 or Automatically
TV-Scart-Output
Select the type of video signal at the TV Scart
socket here. Select the signal that your TV set can
process.
- FBAS – Color Video Baseband Signal
- RGB – Red/Green/Blue signal (not currently
available) or
- Y/C – S-Video signal (luminance/chrominance)
Press the
!
(green) button to move to the next menu.
HDMI/YUV Format
Select here the video resolution that is to be used on
your TV. Either
- 1080i (resolution 1920 x 1080, half-screen images)
- 576p (resolution 720 x 576, full-screen images) or
- 720p (resolution 1280 x 720, full-screen images)
Show 4:3 event
Select here the type of screen display for 4:3
programmes on a 16:9 TV:
- normal (Pillarbox)
- stretched (Fullscreen)
- zoom in (Pan & Scan)
Audio format via HDMI
Select here the type of audio signal that is to be
output over the HDMI interface. Select the signal that
your TV set can process.
- Decoded PCM
- S/PDIF format