Kathrein UFS 902 - Manual (Page 25)

25
Selection “EXR 552”
Transmission channel
Use the

buttons to select a free available transmission channel. A maximum of two transmission
channels are available (1400 and 1516 MHz).
Test connection
When you have set a free transmission channel, press the

buttons to switch to the “Test
connection” selection fi eld and press the button. The receiver now tests whether a connection to the
single-cable system can be established or not. As soon as the receiver has established a connection to
the single-cable system, you will see the following display:
FIRST INSTALLATION: Single-cable system (manual)
If no connection to the single-cable system could be established, the following display appears:
Check your settings and if necessary call for expert help.
When the EXR 552 single-cable
switching matrix is being used, it
is essential that the LNB is set to
“Universal”!
Press the button to acknowledge this display.
Then press the

button. You will be asked whether you
wish to save the changes. Use the

buttons to select
“Yes, save changes” and confi rm by pressing the
button. Now press the
!
(green) button.
The receiver will automatically display the menu for the
channel search. Continue with the section (Execute channel search).