Kathrein UFS 902 - Manual (Page 34)

34
Press the button to open the channel list.
When you open this list the channel list selection / sort order is displayed from where you selected the
last channel.
At the top left you will see the selected channel list (TV Channel or Radio Channel) displayed.
Press the
#
(blue) button to switch between the TV and radio channel lists.
Underneath you can see the channel list with the sort order you selected.
The channel list can display channels sorted by various selection and sorting criteria.
Press the
"
(yellow) button once (twice for portal
channels) to view further soundtrack selection
options, if these are transmitted by the channel
provider. Use the

buttons to scroll through
the available selection options. Press the
"
(yellow)
button again, or press the

button to exit this
display again.
OPTION SELECTION
“No or bad signal” indicates that an error has occurred in the reception system or in the receiver settings,
or that the transponder is not transmitting.
Check the Sat IF connection and the LNB confi guration. If you have changed settings, compare them
against the basic settings (provided you had made a note of them as suggested).
ERROR MESSAGE
CHANNEL LIST - TV/RADIO
Also note the bars at the bottom
of the on-screen display! These
provide information on what to do
next.
ON-SCREEN DISPLAYS (OSD)