Kathrein UFS 902 - Manual (Page 38)

38
“PREVIEW” VIEW (PROGRAMME MAGAZINE)
The “Preview” view (programme magazine) can be opened at any time in EPG by pressing the
"
(yellow)
button.
EPG - ELECTRONIC PROGRAMME GUIDE
In the “Preview” view you will see all the programmes that will be shown in the previous “Current” list
of selected channels. Provided that EPG data has been supplied by the channel provider, the receiver
displays the programmes that will be shown on the selected channel for several days in advance.
You can use the cursor buttons (
 
) to select the desired programme and, if available, you
can use the button to open further information on the desired programme.
You can use the

buttons to scroll through the channels in the order of the overall channel list
(the channels can also be selected by entering digits with the number buttons); you remain however in
“Preview” view.
The
&
button allows you to scroll backwards and forwards a day at a time.
Using the

(red dot) button you can copy the selected programme to the recording settings (see
“Recording” section).
Also note the bars at the bottom
of the on-screen display! These
provide information on what to
do next.

button allows you to look ahead in 15 minute steps to future programmes on the channels (press
the

button to return to the current time).
If you wish to view the program currently being shown on a channel, you need not to exit the EPG,
just select the desired channel and press the button. At the top right of the screen you will see the
current TV picture for the selected channel. The picture however only appears once the button has
been pressed. Previously what you saw was the picture of the old channel that had previously been
selected, even though the EPG was no longer set to that channel.