Kathrein UFS 902 - Manual (Page 73)

73
TECHNICAL APPENDIX
FEATURES
Q Reception of digital satellite TV channels and radio programmes in DVB-S and DVB-S2 transmission
standards
Q Video decoding of MPEG-2 and MPEG-4/H.264 signals
Q 12-character alphanumerical display shows channel names and transmitter information
Q 4,000 channel memory positions
Q Kathrein Convenience EPG with timer programming ¹ )
Q Common Interface for one CA module ² )
Q HDMI output for connecting a HDTV-capable TV set
Q Up-scaler for upscaling the Pal signal to 576p, 720p and 1080i
Q Guided fi rst installation
Q Pre-programmed channel list
Q Optical audio output for Dolby Digital data stream (AC 3)
Q YPbPr output
Q Cinch sockets for AV signals (composite FBAS, stereo audio)
Q One USB 2.0 port on the rear of the unit
Q 8 favourite channel lists for TV and 8 for Radio
Q 1,000 timers (series and interval timers)
Q Comp. colour, RGB and Y/C signal output programmable via Scart socket
Q Software updates via satellite and from a USB stick (both the operational software and the
programme lists can be updated)
Q Language selection for multilingual broadcasts
Q On-screen display (OSD) in 10 languages (D, GB, F, I, E, CZ, NL, PL, TR, RUS)
Q DiSEqC TM 1.0 control signal and SCR single cable control signals
Q Operating system based on LINUX
Q Power switch
Q Product package: Infrared remote control, batteries, operating manual, safety instructions,
Scart cable, power supply cable
¹ ) Display of information only if broadcast by the programme provider
² ) CA modules and Smart cards not included