Kathrein UFS 902 - Manual (Page 42)

42
RECORDING (TIMER)
The

(red dot) button allows you to set up a programme at any time for recording on an external recorder.
The programme to be recorded can be selected in any of the EPG views, provided the

(red dot) button
appears at the bottom of the screen display.
Programme present in the EPG:
Select the desired programme and press the

(red dot) button. The following display appears (see
example picture below):
Programme not present in the EPG:
Select any programme on the channel on which the desired programme is to be transmitted at a later
time and press the

(red dot) button (starting and fi nishing times together with the recording date must
be input manually). The following display appears (example):
Use the

buttons to select the desired recording mode. The following recording mode options are
available:
-
once: The recording will be performed once only
- daily: The recording will be performed daily at a time specifi ed by you
- weekly: The recording will be performed once a week on the same day and at the same time
- user-defi ned: The recording will be performed on days specifi ed by you at times specifi ed by you
- Series recording: The selected programme will be set up by the EPG for recording every time
it is transmitted (may even be on different channels). This function does however require a daily
update of the EPG data (the data are updated automatically when switching off into stand-by mode).
Use the cursor buttons (
 
) to select the further items and use the number buttons to complete
the settings. When all settings have been made, press the button to save the recording settings.
You can view the scheduled recordings in the timer list view of the EPG (see section “Timer list”).
EPG - ELECTRONIC PROGRAMME GUIDE
Remember to pro-
gram your external
recorder in accor-
dance with the timer
list programmed in
the receiver.