Network control protocol, Network control protocol -45 – Kentrox AI296 User Manual
Page 139
AI296 Version 9.8x User’s Guide
Link Configuration: General PPP Properties Configuration
6-45
Configuration in the AI296 Local Menu System
1. Access the AsyncPPP or SyncPPP Link Menu.
2. Select
PPP Configuration Menu
. The PPP Configuration Menu appears.
3. For
Maximum Receive Unit
, enter the byte value. The defaults are
1518
for network
control protocol
BCP
and
1500
for network control protocol
IPCP
.
4. For
Maximum Transmit Unit
, enter the byte value. The defaults are
1518
for network
control protocol
BCP
and
1500
for network control protocol
IPCP
.
This example displays
Maximum Receive Unit
set to
1000
and
Maximum Transmit Unit
set to
900
for an
IPCP
network control protocol.
Network Control Protocol
Description
This menu item defines the network control protocol as BCP or IPCP. BCP configures,
enables, and disables bridge protocol modules on both ends of a PPP link. IPCP
configures, enables, and disables IP protocol modules on both ends of a PPP link.
Menu Item Type
Toggle
Link Type Availability
AsyncPPP and SyncPPP
PPP Configuration Menu
Link being configured . . . . . . . . . . . . . . . . . . . . . . . . . 3
Network Control Protocol . . . . . . . . . . . . . . . . . . [IPCP] BCP
IPCP Address Parameters
Local IP address . . . . . . . . . . . . . . . . . . . . . . ....... 0.0.0.0
Remote IP address . . . . . . . . . . . . . . . . . . . . . . ....... 0.0.0.0
Subnet Mask . . . . . . . . . . . . . . . . . . . . . . . . . 255.255.255.240
Maximum Receive Unit . . . . . . . . . . . . . . . . . . . . . . . . . . 1000
Maximum Transmit Unit . . . . . . . . . . . . . . . . . . . . . . . . . . 900