Kentrox AI296 - Manual (Page 347)

AI296 Version 9.8x User’s Guide
AI296 Commands: staeia
9-89
staeia
Description
This command displays the status of the EIA leads.
Command Types
shell and winslc
Formats
For the shell command:
staeia { link_range | * }
For the winslc command:
winslc baseport staeia { link_range | * }
Parameters
Examples
This example displays the status of the EIA leads for links 1 to 5 .
link_range Defines a link or range of links. Valid values are 1 to 32. Individual
values are separated by commas (,) and hyphens (-). For example,
1,4-6 specifies links 1, 4, 5, and 6.
* Specifies all links.
baseport Defines the baseport of AI296.
[296]staeia 1-5
Link Type Status IN OUT
DCD CTS DTR RTS
1: ASY Enabled - - + +
2: X25 Enabled - - + +
3: X25 Enabled - - + +
4: X25 Enabled - - + +
5: X25 Disabled
[296]
Column Description
DCD DCD is an incoming EIA lead control signal. The plus symbol ( + )
indicates that this lead is asserted. The minus symbol ( - ) indicates that
the lead is negated.