Kentrox AI296 - Manual (Page 354)

AI296 Version 9.8x User’s Guide
AI296 Commands: tacacs
9-96
tacacs
Description
This command displays TACACS+ log and shell session information.
Command Type
shell
Formats
tacacs
info
sholog [ -p ]
stats [ clear ]
Parameters
info Specifies how the current shell session was authenticated. If the
current session was authenticated by a TACACS+ server, it will display
the IP address of the server. If a TACACS+ server could not be
contacted and fallback is enabled, it will display
Fallback to local . If
TACACS+ authentication was disabled, it will display Local .
sholog Displays the contents of the TACACS+ debug log file. The TACACS+
debug log file records all connection attempts to TACACS+ servers.
The following information is displayed for each connection attempt:
z A record of the timestamp
z The IP address of TACACS+ server
z The AAA phase
z The success or failure status associated with each connection.

Note: The TACACS+ debug log file is only populated when TACACS+
debugging is enabled using command debug tacacs on .
The following parameters are accepted:
-p —Paginates the sholog output.
stats Displays or clears TACACS+ specific counters and statistics. The
following parameters are accepted:
clear —Clears the counters and statistics.