Kentrox AI296 - Manual (Page 239)

AI296 Version 9.8x User’s Guide
Alias and Call Routing Configuration: Protocol Processing Modules
8-35
Examples
TN
The Telnet module filters Telnet commands out of the data stream and processes
them appropriately. It also adds commands, as necessary, to data as it travels
downstream. When a Telnet break is received, it is converted to an X.25 or
asynchronous break as required. When an X.25 or asynchronous break is received
from upstream, it is converted to a Telnet break and passed downstream.
Defaults
Passes breaks upstream
Passes breaks downstream
Initiates Telnet negotiation for WILL Echo and WILL SGA
Optional Parameters
TL1 -T6 Provides TL1 packetizing and sets the packetizing timer to .06
seconds.
TL1 -F10,127 Provides TL1 packetizing and filters out the characters for line
feed and delete.
TL1 -U Provides TL1 packetizing and prevents breaks from passing
upstream.
TL1 -120 -D Provides TL1 packetizing on TL1 delimiters for 20 seconds of idle
time. Prevents breaks from passing downstream.
-U Prevents passing break upstream.
-D Prevents passing break downstream.
-E d,d Initiates Telnet negotiation for WILL Echo and WILL Suppress Go Ahead
(SGA). This is useful when a Telnet connection is made to a remote device
that provides an echo. If
d,d is specified, then the Telnet negotiation string
is modified. The Telnet negotiation string can be up to 32 characters.