Kentrox AI296 - Manual (Page 183)

AI296 Version 9.8x User’s Guide
Link Configuration: Virtual Circuit Configuration
6-89
This example displays:
z 01*PVC Type set to Connect
z 02 LCN Low set to 5
z 03 LCN High set to 15
z 04 INACTIVITY Timer Interval set to 240 .
Configuration in the AI296 Local Menu System
1. Access the X.25 Link Menu.
2. Select Quick X.25 Menu . The Quick X.25 Menu appears.
3. For Number of PVCs , enter the number of PVCs to be configured. The default is 0 .
4. For SVC Low , enter a minimum SVC value that is higher than the number of PVCs.
Valid values are from 0 to 4095 . The default is 1 .
5. For SVC High , enter a maximum SVC value that is higher than the minimum SVC
value. Valid values are from 0 to 4095 . The default is 1 .
6. Save your work.
7. From the Quick X.25 Menu, select PVC Menu . The PVC Summary Menu appears.
8. For Edit PVC , enter the number of the PVC to be edited. This value must be in the
range of configured PVCs. The PVC Edit Menu appears.
9. For Low PVC , enter the minimum PVC value.
10. For High PVC , enter the maximum PVC value.
11. For PVC Type , select Passive , Active , or ConnectOnActivity . The default is Passive .
12. For Timer Value , select the timer interval value.
Passive Reset Timer 0 s 0 s
>4,240
Menu 4.2.11.12.9.2.1
01*PVC Type (Passive, Active, Connect on activity)----------------------Connect
02 LCN Low (* for all LCNs for the link)-----------------------------------0005
03 LCN High----------------------------------------------------------------0015
04 INACTIVITY Timer Interval (seconds)------------------------------------00240
Table 6-1 PVC and Timer Type (Continued)
PVC Type Timer Type Range Default