Kentrox AI296 - Manual (Page 357)

AI296 Version 9.8x User’s Guide
AI296 Commands: tacacs server
9-99
tacacs server
Description
This command enables, disables, or removes the configuration for specified
TACACS+ servers.
Command Type
shell
Formats
config tacacs server
{ server_range | * } { disable | enable | default }
ip { server_range | * } { ip_address }
phase { server_range | * } { disable | enable }
{ account | all | authen | author }
port { server_range | * } { port_number }
secret { server_range | * } { shared_secret }
summary [ server_range | * ]
Parameters
* Specifies all TACACS+ servers.
default Disables all servers in the range and sets all configuration values
to their defaults.
disable Disables the TACACS+ server or range of TACACS+ servers.
enable Enables the TACACS+ server or range of TACACS+ servers.
ip Configures an IP address for specified TACACS+ servers.

Note: AI296 does not prevent users from configuring multiple
server entries with the same IP address.
The following parameters are accepted:
z * —Specifies all TACACS+ servers.
z server_range —Specifies a server number or range of server
numbers.
z ip_address —Defines the server IP address.