Kentrox AI296 - Manual (Page 213)

AI296 Version 9.8x User’s Guide
Alias and Call Routing Configuration: Call Routing
8-9
8. (optional) For Call Data , enter the call user data.
Call data is dependent on the type of SLC being used. It may be directly entered
as an alias macro.
9. (optional) For Caller's Protocol , enter the caller’s protocol type.
For more information about protocol types, refer to Protocol Processing Modules
on page 8-29 .
10. (optional) For Called Protocol , enter the called protocol type.
For more information about protocol types, refer to Protocol Processing Modules
on page 8-29 .
11. For Display Alias in Destination Menu , select Yes or No .
This setting specifies if the alias will appear in the welcome screen.
12. For Alias Location , select Beginning or End to place the alias at the beginning or end
of the alias table.
13. Select <F2> Send to save the changes.
14. Repeat this procedure for additional alias configurations.
Arranging Aliases in the Alias Table
To arrange aliases in the alias table:
1. From the AI296 Main Menu, access the Alias Menu. The Alias Summary Menu
appears:
Alias Summary Menu
Find alias:
[Add Alias]
[Sort]
+ alias4 [Move] [Delete]
+ alias2 [Move] [Delete]
+ alias1 [Move] [Delete]
+ alias3 [Move] [Delete]
Range: {255 characters}
<F1> Help <F4> Close <Ctrl-R> Return to Main Menu