Kentrox AI296 - Manual (Page 26)

AI296 Version 9.8x User’s Guide
Product Description: Individual Port Access
1-10
The following characteristics apply to pin assignments:
z Any pin assignment not referenced on a connector is not connected.
z Signals with a (-) sign after them are used when RS-232 is selected.
z Signals with both (+) and (-) after them are used when RS-530, V.35, or V.11 are
selected.
z When RS-530 is selected, both the (+) and the (-) signals are used. The DSR is
only supported in RS-232 mode. There is no DSR+ signal.

Note: The pin assignments also apply to CAB257.
RJ45 10BaseT Connectors
Figure 1-4 displays the RJ45 10BaseT connector.
Figure 1-4 RJ45 10BaseT Connector on an AI296 Front Panel
Figure 1-4 lists the specifications for the RJ45 10BaseT connector.
CAB182 cables connect network elements to the individual connectors on the
distribution panel (straight through applications).
19 RTS+ Output
20 DTR- Output
23 DTR+ Output
Table 1-4 RJ45 10BaseT Connector Specifications
Pin Signal Direction
1 TD+ Output
2 TD- Output
3 RD+ Input
6 RD- Input
Table 1-3 DP196-19/23 Pin Assignment Specifications (Continued)
Pin Signal Direction
Pin 1 Pin 8