Kentrox AI296 - Manual (Page 327)

AI296 Version 9.8x User’s Guide
AI296 Commands: pad
9-69
pad
Description
This command calls an X.25 PAD host. It is used with the X.3, X.28 and X.29
protocols. Used with a link number, it calls the X.25 device connected to that link.
Without parameters, it enters the command mode.
Command Types
shell
Formats
pad

Note: There are several parameters available with this command. See the list below.
Parameters
break Sends a break signal to host.
breakaction Sets a breakaction.
breakin Sets a PAD recall character.
call host Sets up a connection to the named host.
clear Closes the current connection.
echo Enables/disables terminal echo.
emask Sets the terminal echo mask to n .
flow Enables/disables terminal flow control.
forward Sets data forwarding conditions.
help Displays help information.
hosts Lists all the available hosts.
int Sends an interrupt packet.
lfinsert Sets line feed insertion action.
loghost Displays X.29 messages.
message Enables the message mode of operation.
native Enables the native mode of operation.