Kyocera KM-C2030 - Manual (Page 105)

5 5.5 Selecting the Orig > Copy Settings (Original Settings)
5-18
Sp
ec
ify
ing Co
py
Se
tti
ngs
Ch
apte
r 5
7 If the settings for frame-erasing or center- & frame-erasing are selected, touch
and to specify the width of the area to be erased. The width of the
area erased with the center-erasing setting is not changed by touching
and .
? Were the areas of the book not erased correctly?
➜ When a “Book Erase” setting is selected, be sure to touch [Original Size] on
the Book Erase screen and specify the size of the original. If the document
size is incorrect, the correct area of the copy will not be erased.
8 If “Original Size” is se-
lected, a screen show-
ing the available
document settings ap-
pears.
9 Select the size of the
document to be copied,
and then touch [Enter].
The Original Size setting
should be the size of the
book spread.
10 To specify a document size in metric measurements, touch [Metric], select the
appropriate document size, and then touch [Enter].
11 To specify a photo size
for the document, touch
[Photo Size or Custom
Size], select the appro-
priate document size,
and then touch [Enter].