Kyocera KM-C2030 - Manual (Page 47)

2 2.5 Making Test Copies (Copy 1 Set)
2-16
B
a
s
ic
Co
py
O
per
ati
o
n
s
Chap
ter
2
2.5 Making Test Copies (Copy 1 Set)
Before printing a large number of copies, a sample copy can be printed so you can
check the specified settings. This is convenient for checking the selected settings
before printing.
If a job is currently being printed, that job is interrupted so one test copy can be
printed. After the single test copy is printed, the interrupted job automatically con-
tinues printing.
The number of copies remaining after the test print are recorded and the job is
queued to be printed.
To make a test copy
1 Select the desired Copy mode settings.
2 In the Basic screen,
touch [Copy 1 Set].
3 Press the [Start] key.
Scanning of the
document begins, and
the job is queued.
4 Only one test copy is
printed. Check the test
copy.
A message appears,
asking if the job should be continued.
5 If the remaining number of copies can be made with the current settings, touch
[Yes].
The print job is queued
for printing of the re-
maining number of cop-
ies.
6 If the remaining number
of copies cannot be
made with the current settings, touch [No]. The remaining number of copies of
the job for the test print is canceled.