Kyocera KM-C2030 - Manual (Page 65)

3 3.5 Loading Paper
3-16
Lo
adi
ng P
a
p
e
r
Ch
apte
r 3
7 Touch and to select the length of side Y for the paper that is loaded.
❍ Touch until the cursor moves below the fraction that you wish to
change.
The entered length of side Y appears.
8 Touch [Size Registration].
9 Touch either [1] or [2].
10 Touch [Enter], and then touch [Enter] in the Input screen.
The custom paper size is stored.
To select a stored non-standard (custom) paper size
1 Touch [Paper].
A screen that shows the specified paper size settings appears.
2 Select the 1st drawer, and then touch [Size Change].
3 Touch [Custom Size].
4 Touch either [1] or [2]
to select the stored
custom paper size.
5 Touch [Enter], and
then touch [Enter] in
the Input screen.
The paper size for the
1st drawer is set.