Kyocera KM-C2030 - Manual (Page 26)

1.5 Turning the Copier On and Off 1
1-19
B
e
fo
re
Ma
ki
ng C
opi
es
Ch
apte
r 1
To turn the copier off
1 Touch [Job Log] to check that no
jobs are queued.
2 If any copies or printouts remain in
the output tray, remove them.
3 Set the power switch to “O”.
✎
Note
Do not turn off the copier while it is making copies or printing, otherwise a paper
misfeed may occur.
Do not turn off the copier while it is scanning or sending or receiving data, oth-
erwise all scanned data or transmission data will be deleted.
Do not turn off the copier while a queued job or stored data is waiting to be print-
ed, otherwise the jobs will be deleted.
When the copier is turned off
● The following are cleared.
❍ Settings that are not programmed, such as the number of copies
❍ Jobs queued to be printed
❍ Data scanned using the “Scan to Memory” function
❍ Jobs saved with the “Memory Recall” function
● Stored zoom ratios, programmed Copy mode settings, Utility mode settings and
UserBox settings are not erased.