Kyocera KM-C2030 - Manual (Page 46)

2.4 Interrupting a Copy Job 2
2-15
B
a
s
ic
Co
py
O
per
ati
o
n
s
Chap
ter
2
7 If the job that printing was interrupted for is ready for printing, the interrupted job
stops being printed and the job that printing was interrupted for is printed.
When printing is finished, the job that printing was interrupted for is removed
from the job display.
8 Press the [Interrupt] key. The [Interrupt] key indicator goes off and Interrupt
mode is canceled.
The Copy mode settings for the job before printing was interrupted appear, and
printing of the job that was interrupted automatically continues.