Kyocera KM-C2030 - Manual (Page 147)

6 6.3 Job Control Screens
6-22
Co
ntr
o
lli
ng J
o
b
s
Cha
p
ter 6
Touch [Basic] to display the Basic screen again.
The following details of the jobs are displayed.
To recall a job from the memory
1 Select the job that you wish to print from the memory.
❍ To recall more than two jobs, repeat the above step until all jobs that you
wish to recall are selected.
2 Touch [OK]. The jobs are deleted from the list on the Memory Recall screen.
❍ The job changes from one stored in the memory to one waiting to be printed.
3 Touch [Job Log], and check the status of the jobs.
No. Item Name Description
1 Job number Job identification number assigned when the job is programmed
2 Up/down arrows When there are more than five jobs, press these arrows to
display jobs higher or lower in the list (higher or lower in the
printing order).
3 Job name Displays the type (source) of the job
“COPIER” is displayed for copy jobs.
4 Output location Indicates the tray where the printed page will be fed out
5 File name Displays the name of the file for print jobs sent from the
computer
6 Original Displays the number of pages in the original document
7 Copy Displays the number of pages in the copy
While the job is being printed, the number of pages remaining
to be printed is counted down.
8 Beginning time Displays the time that the job was programmed
9 Completion time Displays the time when printing of the job is expected to be
finished
3 4 5 6 7 8
1
2
2
9