Kyocera KM-C2030 - Manual (Page 19)

1 1.3 Names of Control Panel Parts and Their Functions
1-12
B
e
fo
re
Ma
ki
ng C
opi
es
Ch
apte
r 1
1.3 Names of Control Panel Parts and Their Functions
No. Part Name Description
1 Touch panel • Displays various screens and messages See p. 1-20
2 keypad • Use to type in the number of copies to be made.
• Use to type in the zoom ratio.
• Use to type in the various settings.
3 [Utility] key • Press to display the Utility screen.
Input
Meter Count
User’s Choice 1 & 2
Copy Program Recall
Unit life indicator
Admin. Mode
4 [Mode Check] key • Press to display the specified settings in Copy mode.
• Press to display the specified transmission settings in Scan
mode.
5 [Scan] key • Press to use this machine as a color scanner.
• When the [Scan] key is pressed, the key indicator lights up in
green to indicate that the machine is in Scan mode.
• Scan mode is only available if the optional printer controller
is installed. If the printer controller is not installed, scanning
cannot be performed.
6 [Copy] key • Press to use this machine as a copier.
• When the [Copy] key is pressed, the key indicator lights up in
green to indicate that the machine is in Copy mode.
*Copy mode is selected as a default.
7 [Access] key • Press to enter an access code.
• If no access codes have been set, nothing happens when
this key is pressed.
8 [Interrupt] key • Press to enter Interrupt mode.
• When the [Interrupt] key is pressed, the key indicator lights
up in green to indicate that the machine is in Interrupt mode.
In addition, the message “Now in the Interrupt mode”
appears on the touch panel.
• To cancel Interrupt mode, press the [Interrupt] key again.
A
1 2 3 4
6
7
8
9
10 11 12 14 15
5
13