Kyocera KM-C2030 - Manual (Page 63)

3 3.5 Loading Paper
3-14
Lo
adi
ng P
a
p
e
r
Ch
apte
r 3
To set a paper size in metric measurements
1 Touch [Paper].
A screen that shows the specified paper size settings appears.
2 Select the 1st drawer, and then touch [Size Change].
3 Touch [Metric].
The Input screen appears with paper sizes in metric measurements.
4 Select the setting for
the size of paper that is
loaded.
5 Touch [Enter].
The paper size for the
1st drawer is set.
To set a non-standard (custom) paper size
✔ If non-standard-sized paper is loaded, it will be necessary to enter the paper
size.
1 Touch [Paper].
A screen that shows the specified paper size settings appears.
2 Select the 1st drawer, and then touch [Size Change].
3 Touch [Custom Size].
The Custom Size screen appears.
4 Make sure that
is selected.
5 Touch and
to select the
length of side X for the
paper that is loaded.
❍ Touch until
the cursor moves
below the fraction that you wish to change.
The entered length of side X appears.