Kyocera KM-C2030 - Manual (Page 89)

5 5.1 Selecting a Color Setting
5-2
Sp
ec
ify
ing Co
py
Se
tti
ngs
Ch
apte
r 5
The settings for the Copy mode can be changed to fit your need.
This chapter explains how these settings can be changed.
5.1 Selecting a Color Setting
The Color setting is selected when copies are being made.
There are three Color settings.
● Auto Color
The copier automatically determines whether the document is in color or in
black and white, then selects the appropriate color setting for the document.
❍ If the document was determined to be in color, a copy is made with the Color
setting “Full Color”.
❍ If the document was determined to be in black and white, a copy is made with
the Color setting “Black”.
● Full Color
❍ The scanned document is copied in full color.
● Black
❍ The scanned document is copied in black and white.
✎
Tip
The level for detecting a color or black-and-white document with Color setting
“Auto Color” can be adjusted using the “ACS Judgement Level Adjust.” function
on the User’s Choice: 2 screen. For more details, refer to “Specifying Default
Settings (“User’s Choice” Functions)” of “Utility Mode Operations” in the
Administrator Operations volume.
To select the Color setting
1 Touch [Color].
A screen appears, showing the specified Color setting.
2 Select the desired Color setting.