Kyocera KM-C2030 - Manual (Page 22)

1.4 Adjusting the Angle of the Control Panel 1
1-15
B
e
fo
re
Ma
ki
ng C
opi
es
Ch
apte
r 1
To adjust the angle of the control panel
1 Pull the control panel release lever
toward you, and then push down
on the control panel.
2 The angle of the control panel
stops at the middle position.
3 To adjust the control panel to an
even steeper angle, pull the con-
trol panel release lever toward
you, and then push down on the
control panel.
4 The angle of the control panel
stops at the lower position.
5 To return the control panel to the
upper position, pull the control pan-
el release lever toward you, and
then pull up on the control panel.