Kyocera KM-C2030 - Manual (Page 124)

5.9 Checking the Settings 5
5-37
Sp
ec
ify
ing Co
py
Se
tti
ngs
Ch
apte
r 5
4 Touch [Next] to display the third screen of settings.
5 To change a setting:
❍ Touch the setting that you wish to change. The corresponding screen ap-
pears.
❍ Change the setting as desired.
✎
Tip
The corresponding screens for the “Scan to Memory”, “Separate Scan”,
“Copy 1 Set” and “Neg. Pos. Reverse” functions and the “Glossy Mode” set-
ting are not displayed. Perform the usual procedure to display the corre-
sponding screens when changing these settings.
To change the settings
1 Press the [Mode Check] key.
2 Touch [Next] or [BackUp] until the screen containing the setting that you wish to
change appears.
3 Touch the setting that you wish to change. The corresponding screen appears.
4 Change the setting in the same way that it would normally be set.