Kyocera KM-C2030 - Manual (Page 62)

3.5 Loading Paper 3
3-13
Lo
adi
ng P
a
p
e
r
Ch
apte
r 3
Setting the Paper Size for the 1st Drawer
Since the size of the paper loaded into the 1st drawer is automatically detected, it
is usually not necessary to set the paper size.
However, it may be necessary to set the paper size if the paper size is not automat-
ically detected for some reason or if non-standard size paper is loaded.
To set the paper size
1 Touch [Paper].
A screen that shows the specified
paper size settings appears.
2 Select the 1st drawer.
3 Touch [Size Change].
The Input screen appears.
4 Select the setting for
the size of paper that is
loaded.
5 Touch [Enter].
The paper size for the
1st drawer is set.