Kyocera KM-C2030 - Manual (Page 70)

3.5 Loading Paper 3
3-21
Lo
adi
ng P
a
p
e
r
Ch
apte
r 3
Loading Paper Into the Manual Bypass Tray
Paper can be fed manually through the manual bypass tray if you wish to copy onto
paper that is not loaded into a drawer, or if you wish to copy onto special paper.
1 Touch [Paper].
A screen that shows the specified paper size settings
appears.
2 Select the manual bypass tray.
3 The Paper Input Size
screen appears.
4 Select the setting for the size of paper that is loaded.
❍ For paper sizes in inch measurements, touch [Inch] to display a screen con-
taining inch paper size settings.
5 For a paper size other than the standard sizes listed on the screen, touch
[Custom Size] to display a screen that allows you specify a size.
6 Touch , ,
and
to select the
length of side X for the
paper that is loaded.
❍ Touch until
the cursor moves
below the fraction
that you wish to
change.
7 Touch , ,
and
to select the
length of side Y for the paper that is loaded.
❍ Touch until the cursor moves below the fraction that you wish to
change.