Kodak 500 - Manual (Page 123)

6-6 A-61628 December 2011
Method 1 The administrative configuration file and optional update package is
uploaded using the KSS500 - Scanner Admin application. The Scan
Station will automatically recognize the new configuration file or update
package and perform an update automatically.
The KSS500 - Scanner Admin application can be used to upload new
configuration files and new firmware updates to the Scan Station.
Uploading files
1. Select the Scan Station(s) you want to send a new configuration file
to.
NOTE: If you want to move items/groups many times, it is
recommended that you use the Ctrl key sequences (Ctrl-Up
arrow/Ctrl-Down arrow) as this will be faster.
2. Select Scanner>Configuration>File Upload. The Open dialog box
will be displayed.
3. Select the configuration file that you want to upload and click Open.
The message, Uploading, Please wait will be displayed while the
file is being uploaded.
NOTES:
• Only a KSS500.xml file can be sent to the Scan Station.
• If each Scan Station or a group of Scan Stations require a
different configuration, it is recommended that a common folder is
created with subfolders underneath to store individual
configuration files.
When new configuration files are found, the following will occur:
• The contents of the update will be applied to the Scan Station.
• If newer settings are found, the settings will be applied to the
Scan Station as the new default settings.
• The Scan Station will be restarted if the network settings for the
Scan Station have been modified.