Kodak 500 - Manual (Page 40)

A-61628 December 2011 3-27
LDAP settings Connecting to an LDAP server allows the Scan Station and the
Configuration Organizer to connect to a network address directory. This
connection can be used to import one or more email addresses into an
email address group. It can also be used to look up addresses on the
Scan Station to temporarily add an email address to an email group list.
1. From the E-mail screen, select LDAP Settings.
2. Select the LDAP Server Address.
3. Enter an IP address or a fully qualified domain name (e.g.,
directoryserver.mycompany.com) and click Done.
4. Select Credentials.
5. Enter a Username, Password and an optional Domain name on
the Credentials screen for the LDAP server account that the Scan
Station will log into. Even though these credentials may be the same
as the Default Credentials, they must still be defined here.
6. Click Done.
7. Most LDAP servers communicate on Port 389. If your LDAP server
communicates on a different port, select Port.
8. Enter a new Port number and click Done.