Kodak 500 - Manual (Page 60)

A-61628 December 2011 3-47
Setting the Scan
Station clock The time on the Scan Station can only be set when the Scan Station is
in local administrator mode and by using a USB drive that contains an
administration configuration file.
NOTE: Currently, you cannot set the time of the Scan Station remotely
using the KSS500 - Scanner Admin application.
1. Insert a USB drive with an administrative configuration file into the
Scan Station.
2. If prompted to update the Scan Station settings, select No. The
Scan Station will now be in Settings mode.
3. Select the Time icon.
4. Select Set.
5. Enter the time for the Scan Station and click Done.
NOTE: Time is entered in 24-hour format.
Setting the Scan
Station date The date on the Scan Station can only be set when the Scan Station is
in local administrator mode and by using a USB drive that contains an
administration configuration file.
NOTE: Currently, you cannot set the time of the Scan Station remotely
using the KSS500 - Scanner Admin application.
1. Insert a USB drive with an administrative configuration file into the
Scan Station.
2. If prompted to update the Scan Station settings, select No. The
Scan Station will now be in Settings mode.
3. Select the Date icon.
4. Click Set.
5. Enter the date for the Scan Station and click Done.
6. When finished updating your Scan Station settings, remove the USB
drive from the USB port.