Kyocera FS-5900C - Manual (Page 127)

114
Appendix
■ Transparencies and Labels
You may also print on transparencies and labels that are made for the printer. The
following work satisfactorily.
OHP transparency 3M CG3700, 3M CG3710
Labels
AVERY 5163, AVERY 5164, AVERY 5165
Avery L7163, Avery L7165, Avery L7166, Avery L7167
Avery L7168, Avery L7169
Using OHP Film
When printing on OHP film it is extremely important that the correct side of the film be
facing up when in is loaded into the printer. Failure to load the film correctly may result
in jams or damage to the printer.
Note:
No precaution is necessary when using 3M CG3700 film, as this film can be printed on
either side and fed in any direction.
• When loading OHP film into the multi-purpose tray
When using OHP film that has an adhesive paper strip (3M CG3710), make sure that the
paper strip is on the leading edge and that the paper strip is facing DOWN.
When using OHP film that has a notched corner, make sure that the notched corner is on
the trailing edge and that the notched corner is on the left.
• When loading OHP film into the cassette
When using OHP film that has an adhesive paper strip (3M CG3710), make sure that the
paper strip is on the leading edge and that the paper strip is facing UP.
When using OHP film that has a notched corner, make sure that the notched corner is on
the trailing edge and that the notched corner is on the right.
3M CG3710 Generic OHP Film
Direction of paper feed
3M CG3710 Generic OHP Film
Direction of paper feed