Kyocera FS-5900C - Manual (Page 49)

36
Using the Printer
Ignore LF
CR and LF
>LF action
LF only
>Printer Reset
Continued from previous page
Ignore CR
CR and LF
>CR action
CR only
>MSG language
English
>List of
>Print HEX-DUMP
>Sleep timer
060 min
>Form Feed
Time out 030sec.
resident Fonts
Others >
On
Perm / Temp
On
Permanent
>>Print
Test page 2
>>Print
Test Page 1
>Buzzer
Off
>Service >
>Ecoprint mode
>Resolution
Off
>Resource prot.
Off
( *6)
( *5)
( *7)
>>TransferRoller
? Type X
>>Print
Status Page
*2 : The printer can be set to print error data during KPDL
emulation. If this is set to On , error data will be printed
if trouble occurs during printing. This is set to Off
before leaving the factory.
*3 : The >Size menu is not available for the Courier and
LetterGothic fonts. Use the >Pitch menu to scale
these fixed fonts.
*4 : The RAM DISK mode menu is not displayed when an
optional hard disk unit is installed.
*5 : Any value from 0 to 495 [seconds] in 5-second
increments. (The printer does not time out with the
value set to 0.)
*6 : Any value from 0 to 120 [minutes] in 5-minute
increments.
*7 : For service purpose only.