Kyocera FS-5900C - Manual (Page 74)

61
Using the Printer
■ Memory Card Error Codes
Error codes 11, 13, 17, and 18 apply only to flash memory cards.
Error code Meaning
MEMORYCARD err 01 • You attempted to write more than 32 MB of data to a
Press CONTINUE memory card. Or, the capacity of the memory card
installed in the printer is more than 32 MB.
• A data name not existing on the memory card is
specified. Check the data names on the memory card.
MEMORYCARD err 02 • This memory card cannot be used by this printer.
Press CONTINUE
MEMORYCARD err 03 The memory card is not a JEIDA card. Only JEIDA
Press CONTINUE Ver. 4.2 memory cards can be used by this printer.
MEMORYCARD err 04 The card is an S-RAM or flash card which cannot be
Press CONTINUE used by this printer.
MEMORYCARD err 05 There is no battery in the memory card. Replace the
Press CONTINUE battery in the memory card with a new one.
MEMORYCARD err 06 The memory card is write-protected. Cancel the write-
Press CONTINUE protection of the memory card.
MEMORYCARD err 07 The memory card requires formatting. Format the
Press CONTINUE memory card from the control panel (☞ P. 61).
MEMORYCARD err 09 The capacity of the memory card is insufficient. This
Press CONTINUE error code appears when an attempt is made to write
more data on the memory card than available memory.
To halt the writing of data, first stop data transmis-
sions from the computer, and then press the printer’s
CANCEL key.
Press the FORM FEED key if the message Waiting
will appear in the message display. The message dis-
play will return to
Ready .
MEMORYCARD err 11 The memory card is full of data. The number of data
Press CONTINUE which can be written on the memory card is limited to
127. Pressing the
CANCEL key will restore the mes-
sage Ready in the message display.
MEMORYCARD err 13 This is a logical error. Try substituting another flash
Press CONTINUE memory card.
MEMORYCARD err 17 The flash memory card cannot be written due to
Press CONTINUE insufficient printer memory. Either delete unnecessary
macros and/or fonts stored in the printer, or expand the
printer’s available memory.
MEMORYCARD err 18 This is a write error. Try substituting another flash
Press CONTINUE memory card.