User replaceable components, Care and maintenance – Kyocera FS-5900C User Manual

Page 82

Advertising
background image

69

Care and Maintenance

User Replaceable Components

When the printer panel indicates that a supply needs to be replaced, make sure that you
have replacement supplies on hand. The printer may continue to print until the supply is
completely used up; then it stops until you replace the indicated supply.

Toner Developers

Printer panel message

Average life

*1

Toner Developers

Black

*2

Toner low

11,600 pages

TD-81

x (Colour)

C, M, Y

*2

9,600 pages

Change the colour toner developer soon.

Black

*2

Replace Toner

12,000 pages

TD-81

K (Black)

C, M, Y

*2

10,000 pages

Change the black toner developer now.

Imaging Unit

Monochrome

Warning IU-81

57,000 pages

Imaging unit

or
Colour

Change the Imaging unit soon.

14,250 pages

Monochrome

Replace IU-81

60,000 pages

Imaging unit

or
Colour

Change the Imaging unit now.

15,000 pages

*1

These figures are based on an average of 5% coverage of the printable area and standard density
for any one colour. The frequency of replacement will vary depending on the complexity of the
prints and the percentage of coverage and print density.

*2

The starter developers that are shipped with the printer have an average life of approximately
6,000 pages (Black), 5,000 pages (C, M, Y), based on an average of 5% coverage.

Note:

If you print with high density when

Toner low

is displayed, you may get faded

printout before Replace Toner is displayed.

Advertising