Kyocera FS-5900C - Manual (Page 57)

44
Using the Printer
■ Memory card
The MEMORY CARD menu reads, writes, and deletes data on the memory card. It also allows
formatting the memory card and printing a list of the contents. This menu is available only
when a memory card is inserted into the memory card slot at the back of the printer (☞ P.
57). For instructions on using these submenus, refer to page 57.
Level 1 Level 2
MEMORY CARD > Read fonts
Read macro
Read data
Write data
Delete data
List of Partitions
■ Colour mode
This setting controls whether the page is printed in Colour (four-colour), Quick Colour
(three-colour), on in Monochrome (black and white gray scale).
Level 1 Range
Colour mode Monochrome
Colour (Default)
Quick Colour
■ Colour matching
The Colour matching menu provides three colour matching functions to accurately
represent the original colour by giving different rendering intents.
Level 1 Options
Colour matching RGB Simulation
Vivid mode
For details on each colour matching function, see the table below:
Colour matching mode Description
RGB Simulation Printing is done using colours most closely approximate
the monitor colours. Select the type of monitor being
used. (If your monitor is not listed, set Custom values
as appropriate for your monitor. See the monitor
documentation for appropriate values.)
Vivid mode Adjusts the brightness of colours.