Kyocera FS-5900C - Manual (Page 66)

53
Using the Printer
■ Outputting to a VMB
When sending data to a virtual output tray set within the RAM DISK, make this setting
from the printer driver. With this setting, data can be sent by specifying the desired
virtual output tray number. It is also possible to assign a name to a virtual output tray
and send data by specifying that name. (For details on this setting, please refer to the
help documentation for the printer driver.)
When data is sent by specifying a virtual output tray, printing to paper is not performed
at the time data is sent. Sent data accumulates in the virtual output trays of the RAM
DISK. For details on printing accumulated data, please see the next item.
■ Print Accumulated VMB Data
This function prints VMB data accumulated in a virtual output tray.
1 Select RAM DISK mode on the printer’s Mode Select Menu and
display >Print VMB data Tray. The VMB tray number will appear in
the location marked by #’s below, while the VMB tray name will
appear in the location marked by %’s.
>Print VMB data
Tray###:%%%%%%%
2 Pressing the ENTER key will cause a ? to flash.
>Print VMB data
Tray###?%%%%%%%
3 Each time the + or - keys are pressed, the VMB data display will
change. Press the CANCEL key if you want to halt printing. The ?
display will disappear.
4 Display the VMB data you want to print. Pressing the ENTER key
will cause Processing to be displayed and the data will be printed.