Setup – Kyocera FS-5900C User Manual
Page 46
Advertising
33
Setup
4
Press the
+
or
-
key until
>Print Calibration Page
is indicated.
5
Press the
ENTER
key twice to reprint the Colour Calibration Page.
•
Repeat step 3 above, if necessary.
6
Repeat steps 3 through 5 for each colour (MAGENTA, YELLOW,
BLACK).
•
To skip a colour, press the + button.
•
To return to a previous colour, press the - button.
7
When the Colour Calibration Page and the Calibration Reference
match in all four colours, press the
MODE
key to finalise the
calibration procedure.
Notes:
• The colour density setting affects the average life of toner.
• Save the Colour Calibration Reference for future calibrations.
Advertising