Kyocera FS-5900C - Manual (Page 24)

11
Before You Start
Control Keys
Key Function
ON LINE This key toggles the printer on-line and off-line.
CANCEL This key cancels the data processed in the printer during print-
ing. When the printer is in a mode selection sequence (See
MODE key below), pressing this key abandons mode selection
in course.
STACK/+ • This key selects whether to output media face-down (printed
side down) or face-up (printed side up).
• During a mode selection sequence, this key is used to select
menus and change setting values.
FEED/- • This key selects the paper feed cassette or multi-purpose tray
as the paper source. It can also select an optional feeder if
one is installed.
• Select the alternative paper source when Use alternative?
is displayed.
• During a mode selection sequence, this key is used to select
menus and change setting values.
CONTINUE/ • In normal operating mode, this key forcibly cancels errors
and resumes printing when printing is halted due to errors
such as memory overflow.
• This key functions as the key during a mode selection
sequence: It moves the selection upward in the menu hierar-
chy or moves the cursor left.
EXIT/MODE This key is used to start and end a mode selection sequence.
(☞ P. 34)
FORM FEED/ • In normal operating mode, this key is used to forcibly form-
feed when a print timeout occurs.
• This key functions as the key during a mode selection
sequence: It moves the selection downward in the menu hier-
archy or moves the cursor right.
ENTER/STATUS • During a mode selection sequence, this key confirms the set-
ting made in the mode selection.
• This key determines the paper source while Use alternative?
is being displayed.(☞ P. 94)
• In normal operating mode, this key prints a status page.
Notes
• Menus set using these keys are enabled only for the interface currently indicated on
the message display.
• Settings made from the control panel may be automatically switched to different
settings by application software being used.