Kyocera FS-5900C - Manual (Page 52)

39
Using the Printer
■ Number of copies
The Number of copies menu sets the number of copies to be printed.
Level 1 Range
Number of copies 001 (Default) to 999
■ Emulation
The Emulation menu switches the printer emulation. KPDL is the Kyocera’s
implementation of the Adobe’s PostScript language. KPDL (AUTO) automatically
switches the printer emulation.
Level 1 Range
Emulation PCL 5C
KPDL
KPDL (AUTO)
Notes:
• For details about the emulation menu, see the table marked “ *1 ” on page 34.
• The printer can be set to print error data during KPDL emulation. If this is set to
On , error data will be printed if trouble occurs during printing. This is set to Off
before leaving the factory.
■ Font
The Font menu selects the printer font. The fonts available vary depending on the
emulation.
Level 1 Range Options Description
Font Bitmap Fontnumber See Font Number on list of resident
fonts that can be printed by referring
to List of Resident Fonts (☞ P. 48).
Scalable Fontname See the tables on pages 41 to 42.
Size 004.00 to 999.75 (points)
Pitch 00.44 to 99.99 (cpi)
Note:
The >Size menu is not available for the Courier and LetterGothic fonts. Use the
>Pitch menu to scale these fixed fonts.
For example, to select the 10-point Dutch801-RomanSWM:
1 Press MODE .
2 Press the + key repeatedly until the message display shows Font > .
3 If the Font > menu shows Scalable , proceed to step 4. If it shows
Bitmap , press ENTER (The question mark appears blinking), press
+ (Bitmap changes to Scalable), then press ENTER (The question
mark disappears).
4 Press the key. The current scalable font is indicated.