Kyocera FS-5900C - Manual (Page 15)

2
Before You Start
■ CD-ROM
To prevent the CD-ROM from accidental damages:
• Do not touch or write on the
surface of the disc.
• Do not leave the disc out of the
protective case.
• Do not leave the disc in direct
sunlight or near heat sources.
• Do not place heavy objects on the
disc.
• To clean the disc, hold the disc
by its edges and wipe it from the
centre to the edges with a dry,
soft cloth.
■ Static Electricity Damage
To prevent static electricity damage to any of the following components, touch a grounded metal surface, such as the
printer’s bare metal frame prior to touching the component.
• The interface connectors: Parallel and optional network card
• Electrical components, connectors inside the printer and any components on the optional boards (RAM expansion
board, network interface board, etc.)
• The connector pins on the optional paper feeder for the printer
■ Interface Cable
Always use a shielded interface cable. Use of an unshielded cable can result in radio interference with data.
■ Waste Disposal Method
Waste material may be dumped or incinerated under conditions which meet the applicable environmental
regulations.