Kyocera FS-5900C - Manual (Page 50)

37
Using the Printer
Navigating through the menus
The menus are in the hierarchy as shown in the diagram above. Use the + and - keys to
move between menus in the same level (“vertically” in the table). The + key shows the
next menu, while the - key shows the previous one. Change levels by using the and
keys. The key moves to lower levels (sub-menus), while the key moves to higher
levels.
To change a specific item, for example, the sleep mode timeout time, proceed as follows:
1 Press the MODE key.
The message display will show one of the first level menus (Level 1 in the table on
pages 34 to 36) depending on the previous selection.
2 Press + until Others > is shown on the display.
3 Press .
The message display will show one of the second level menus (Level 2 in the table
on pages 34 to 36) belonging to the Others menu above depending on the previous
selection.
4 Press + until Sleep timer is shown on the display.
5 To change the timeout value, press ENTER .
If you want to abandon setting, press CANCEL , then press MODE .
6 Press + repeatedly to increase the timeout time; press - repeatedly
to decrease the timeout time until the desired timeout time (in
minutes) is displayed.
7 Press ENTER to confirm the new setting.
You can abandon the new setting by pressing CANCEL , then MODE .
8 To quit the mode selection sequence, press EXIT .
(2), (4), (6)
(3)
(5), (7)
(1), (8)