KVH Industries TracVision G8 - Manual (Page 99)

5.8 Replacing the Internal Sensor
1. Disconnect the sensor cable from the internal sensor
assembly.
Figure 5-10 Internal Sensor Assembly (Side View)
2. Using a 3 ⁄
8
" nut driver/socket, remove the four
#10-32 self-locking nuts and flat washers securing the
internal sensor assembly to the sensor bracket. Remove
the old internal sensor.
Figure 5-11 Internal Sensor Assembly (Top View)
Maintenance
54-0198 103
Sensor Cable
Connector
#10-32 Self-locking
Nuts (x 4)
Sensor Bracket
Internal
Sensor