Kenwood DVF-J6050 - Manual (Page 36)

36
Chapter 3: Basic Operation
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
3-25 Pure Audio function (DV-5900M
only)
It blocks the video signal to prevent interference between
the video and audio signals so pure audio can be
reproduced by switching the Pure Audio function On.
When the video signal is blocked, the TV screen shows
no picture during audio playback.
Press the PURE AUDIO button on the remote to
switch the Pure Audio function on/off.
÷ When the Pure Audio function is activated, the
PURE AUDIO indicator lights up. Pressing the
button again switches the Pure Audio function off
and turns the indicator off.
÷ When an operation for displaying the on-screen
message (the display of the performed operation
contents on the TV screen) or OSD is performed,
the video signal is output temporarily.
÷ With some DVD and VCD discs, the menu may be
displayed.
3-26 Switching the audio language
When a VCD or a DVD containing the recording of audio
in multiple languages is played, the language used in the
voice can be switched over. (The audio language can also
be switched by the OSD operation. e)
Press the AUDIO button during playback to display
the "SOUND" OSD. Each further press of the button
switches the displayed
E N G 5 . 1 c h
1 D o l b y
(Audio icon).
÷ If the on-screen message or OSD is displayed
outside the TV screen when using a widescreen TV
or similar monitoring device, set the "OSD
Position" setting to "Cinema".
f
÷ With a DVD AUDIO disc, an audio language
number can be selected from up to 2 numbers.
÷ With a DVD VIDEO disc, an audio language
number can be selected from up to 8 numbers.
÷ With VCD, "Stereo", "L", "R" or "L+R" can be
selected.
÷ The default audio language set by the user is
selected when the power is turned on or the disc is
changed. If the default language is not contained
in the disc, the priority language defined for the
disc will be played back.
÷ The above operation is not available in stop mode.
It is also unavailable with ordinary music CDs (CD-
R, CD-RW).
3-24 Switching the time display
The information in the time display can be switched over.
(The information can also be switched by the OSD
operation. ‚)
This operation is not available in stop mode, during
menu playback of DVD or with a DVD for which time
display is disabled.
If P.B.C. is set to On with a VCD, set P.B.C. to Off.‹
Press the TIME DISPLAY button during playback to
display the "MAIN" OSD. Each further press of the
button changes the time display icons as shown be-
low.
÷ If you are operating the remote, press the TIME
button.
÷ If the on-screen message or OSD is displayed
outside the TV screen when using a widescreen TV
or similar monitoring device, set the "OSD
Position" setting to "Cinema".
f
÷ In the program or random play mode, only "Single
Time" and "Single Remain Time" can be switched
over.
÷ With a MP3 file, only the "Single Time" information
is displayed.
1 : 3 0
SINGLE
"Total Remain Time": Remaining time in a
disc, group or title.
"Single Time": Elapsed play time of a track,
chapter or file.
"Total Time": Elapsed play time of a disc,
group or title.
"Single Remain Time": Remaining time in a
track, chapter or file. 1 2 - : 3 0
SINGLE
2 8 : 5 0
T O TA L
4 5 - : 5 0
T O TA L